STORM OAK

Care & Maintenance

• Clean routinely: Dust-mop or vacuum (hard-floor setting, no beater bar).
• Damp clean: Microfiber pad slightly damp with a pH-neutral laminate cleaner. Avoid wet mops.
• Never use: Steam mops, wax, polish, abrasive pads, vinegar/bleach/ammonia.
• Protect: Felt pads under furniture, soft casters, walk-off mats at entries, area rugs in high-traffic zones.
• Spills: Wipe promptly; dry the joint lines.
• Pets & heels: Keep nails trimmed; avoid stiletto heels.
• Seasonal comfort: Maintain 18–27 °C and 35–55 % RH to minimize movement.

Installation Guide (Quick-start)

• Acclimate: 24–48 hrs in closed cartons, in-room conditions (18–27 °C / 35–55 % RH).
• Moisture: Over concrete, install a 6-mil poly vapour barrier (taped seams).
• Underlayment: Use the attached pad if present; otherwise add a 1.5–2 mm underlayment rated for laminate.
• Flatness: Max 3⁄16″ over 10′ (5 mm over 3 m). Correct high/low spots.
• Expansion gap: ⅜″ (10 mm) at all walls, columns, cabinets, and fixed objects.
• Layout: Stagger end joints ≥ 8″ (200 mm); mix planks from multiple cartons.
• Method: Floating only. No glue or nails.
• Wet areas: Suitable for kitchens/powder rooms with perimeter sealant; avoid saunas, showers, steam rooms.
• Radiant heat: Start system 48 hrs after install, increase temperature 2–3 °C/day to operating temp.