Eastern Oak

Construction

• 12 mm laminate plank with a high-density HDF core for strength and stability
• Embossed-in-Register (EIR) texture delivers a realistic, wire-brushed wood feel
• Matte, low-gloss finish enhances the natural look while reducing visible scratches and footprints

Wear Rating

• AC4 rated — suitable for heavy residential use and light commercial environments
• Built to handle busy households, pets, and frequent foot traffic

Edge & Locking System

• 4-sided micro-bevel for a defined plank appearance
• Waxed, moisture-resistant joints for added spill protection
• Click-lock system (angle/drop) allows fast, glue-free installation and easy board replacement

Performance Benefits

• Solid, quiet underfoot feel
• Helps mask minor subfloor imperfections
• Compatible with most subfloors and radiant heat systems when installed per guidelines

Routine Care

• Sweep or vacuum often using a soft-bristle attachment
• Clean with a lightly damp microfiber mop
• Use a hardwood-approved cleaner only
• Avoid abrasive tools that can dull the finish

With a few simple habits, your White Oak floors will stay beautiful for years.

Installation Guide (Quick-start)

• Acclimate: 24–48 hrs in closed cartons, in-room conditions (18–27 °C / 35–55 % RH).
• Moisture: Over concrete, install a 6-mil poly vapour barrier (taped seams).
• Underlayment: Use the attached pad if present; otherwise add a 1.5–2 mm underlayment rated for laminate.
• Flatness: Max 3⁄16″ over 10′ (5 mm over 3 m). Correct high/low spots.
• Expansion gap: ⅜″ (10 mm) at all walls, columns, cabinets, and fixed objects.
• Layout: Stagger end joints ≥ 8″ (200 mm); mix planks from multiple cartons.
• Method: Floating only. No glue or nails.
• Wet areas: Suitable for kitchens/powder rooms with perimeter sealant; avoid saunas, showers, steam rooms.
• Radiant heat: Start system 48 hrs after install, increase temperature 2–3 °C/day to operating temp.